BLPPZ - 560 LAMINATING RESIN
- MSDS: BLPPZ
- Manufacturer: FIBRE GLASS EVERCOAT CO INC
- Product Name: 560 LAMINATING RESIN
- National Stock Number: 8030-00F019193
Product Identification
Product ID:560 LAMINATING RESIN
MSDS Date:08/08/1988
FSC:8030
NIIN:00F019193
MSDS Number: BLPPZ
Responsible Party
CINCINNATI, OH 45242
Emergency Phone: (800) 543-4530
Info Phone: (513) 489-7600
Cage: 18731
Contractor
Telephone: 513-489-7600
Cage: 18731
Ingredients
STYRENE, MONOMER (SARA III)
CAS: 100-42-5
RTECS: WL3675000
Fraction By Weight: <40%
OSHA PEL 100 PPM
ACGIH TLV: S,50PPM/100STEL;9293
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
UNSATURATED POLYESTER RESIN
Fraction By Weight: >60%
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:SKIN: DEFATTING, DRYNESS, IRRITATION,
DERMATITIS, STYRENE ABSORPTION IN TOXIC AMOUNTS. EYES: TEARING &
IRRITATION. INHALATION: NOSE, THROAT, & RESPIRATORY TRACT
IRRITATION, HEADACHE, NAUSEA, LIVER & K IDNEY DAMAGE. INGESTION:
GASTROINTESTINAL DISTURBANCES, PAIN, DISCOMFORT, & ASPIRATION
HAZARD.
Explanation of Carcinogenicity:STYRENE IS A SUSPECTED 2B HUMAN
CARCINOGEN.
Effects of Overexposure:SKIN: DEFATTING, DRYNESS, IRRITATION,
DERMATITIS, STYRENE ABSORPTION IN TOXIC AMOUNTS. EYES: TEARING &
IRRITATION. INHALATION: NOSE, THROAT, & RESPIRATORY TRACT
IRRITATION, HEADACHE, NAUSEA, LIVER, & KIDNEY DAMAGE. INGESTION:
GASTROINTESTINAL DISTURBANCES, PAIN, DISCOMFORT, & ASPIRATION
HAZARD.
First Aid
First Aid:SKIN: WASH W/SOAP & WATER. EYES: FLUSH W/WATER FOR 15 MIN.
INHALATION: REMOVE TO FRESH AIR. IF UNCONSCIOUS, GIVE ARTIFICIAL
RESPIRATION OR OXYGEN IF NEEDED. INGESTION: DON'T INDUCE VOMITING.
ASPIRATIO N HAZARD. OBTAIN MEDICAL ATTENTION IN ALL CASES.
Fire Fighting
Flash Point Method:CC
Flash Point:89F
Lower Limits:1.1%
Upper Limits:6.1%
Extinguishing Media:WATER SPRAY, FOAM, DRY CHEMICAL, OR CO2
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:AT ELEVATED TEMPERATURES, POLYMERIZATION
MAY TAKE PLACE. IF CONTAINED, VIOLENT RUPTURE MAY RESULT. FLAMMABLE
LIQUID.
Accidental Release
Spill Release Procedures:REMOVE SOURCES OF IGNITION. ABSORB SPILL
W/ABSORBENT MATERIAL SUCH AS VERMICULITE OR SAND.
Handling
Handling and Storage Precautions:DON'T STORE >100F. STORE ONLY ORIGINAL
CONTAINERS.
Exposure Controls
Respiratory Protection:USE A CANISTER TYPE RESPIRATOR FOR VAPORS/SPRAY
MISTS IF >TLV. WEAR A DUST MASK WHEN SANDING CURED PRODUCT.
Ventilation:GENERAL DURING NORMAL USE
Protective Gloves:PLASTIC OR CHEMICAL RESISTANT
Eye Protection:FACE SHIELD OR CHEMICAL GOGGLES
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:295F
Vapor Pres:4.3
Vapor Density:>AIR
Spec Gravity:1.1
Evaporation Rate & Reference:SLOWER THAN BU AC
Solubility in Water:INSOLUBLE
Appearance and Odor:FLUID W/SHARP AROMATIC ODOR
Stability
Stability Indicator/Materials to Avoid:YES
STRONG ACIDS & OXIDIZING AGENTS
Stability Condition to Avoid:HEAT, DIRECT SUNLIGHT, TEMPERATURES >100F,
& OTHER SOURCES OF IGNITION
Hazardous Decomposition Products:ACRID FUMES
Conditions to Avoid Polymerization:AT ELEVATED TEMPERATURES
Disposal
Waste Disposal Methods:SMALL QUANTITIES CAN BE REACTED W/APPROPRIATE
HARDENER TO SOLIDIFY. DISPOSE OF IN ACCORDANCE W/FEDERAL, STATE, &
LOCAL REGULATIONS. FLAMMABLE LIQUID.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.